Cheap Hotel Furniture Supplier Introduces The Acceptance Characteristics Of Hotel Furniture


Posted December 10, 2020 by zhuangheningbo

Cheap Hotel Furniture Supplier introduces the acceptance method of five-star hotel room furniture:
 
Cheap Hotel Furniture Supplier introduces the acceptance method of five-star hotel room furniture:

1. Whether the materials are reasonable: different hotel furniture has different surface materials. For example, the legs of tables, chairs, and cabinets are made of hard materials that are relatively strong and load-bearing, while other materials can be used for the internal materials; the thickness of the legs of the wardrobe can only reach 2.5 cm, which is too thick and looks awkward and too thin. It is easy to bend and deform; kitchen and bathroom cabinets cannot choose fiberboard material, because fiberboard will swell and be damaged when exposed to water, so it should be made of plywood; dining table should be made of water-resistant materials.

2. Whether the moisture content of wood exceeds the standard: the moisture content of hotel furniture should not exceed 12%. If the moisture content is high, the wood is easy to warp and deform. Generally, consumers do not have a test instrument when buying, so they can use the method of hand touch, touch the bottom of the furniture or the unpainted place inside, if it feels damp, then the moisture content is at least 50%, which is not usable at all. Another way is to sprinkle a little water on the unpainted area of ​​the furniture wood. If there is no water immersion or the immersion is slow, the moisture content is higher.

3. Whether the structure is firm: small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when selecting, and dropped gently. If the sound is clear, the quality is better; if the sound is dumb, there is The murmur of pitting, indicating that the mortise is not tightly integrated and the structure is not strong. Writing desks and tables can be shaken by hand to see if they are stable. You can sit on the sofa for a while. If you sit on the sofa, it will creak and creak with a slight movement, and it will sway when it is shaken, indicating that the nails will not take long. There should be four triangular clips on the legs of the square table, the bar table, the chair, etc., which can be used for fixing. When choosing the table and chair, you can turn it upside down and have a look. The cloth-covered chair can be touched by hand.

4. Whether the four legs of the furniture are level: This will be known when you place it on the flat ground. Check to see if the table top is straight. You can use a piece of glass to test if you don’t need to bow your back or collapse your waist. If the table top is raised, the glass plate will spin when you put it on; if the table top is recessed, just press the glass plate. broken. The cabinet doors and drawers should not be too large, and the doors should not sag.

5. Strict joints of veneer furniture: Whether it is pasting wood veneer, PVC or pasting pre-painted paper, pay attention to whether the leather is smoothly pasted, whether there are bulges, blisters, and loose joints. Look at it when checking, otherwise you won't be able to see it. Fraxinus mandshurica veneer furniture is relatively easy to damage, generally only two years. For wood veneer, planed veneer is better than peeling. The way to identify the two is to look at the wood pattern. The sliced ​​veneer has a straight and dense texture, and the peeled veneer has a curved and sparse pattern. For furniture with particleboard veneer, the ground part must be sealed. If the edge is not sealed, the board will absorb moisture, swell and be damaged. Generally, the corners of veneer furniture are easy to lift up. You can buckle the corners with your hands when selecting. If you click it, it means there is a problem with the glue.

6. Appearance details and accessories: For mirror furniture, check whether the mirror is deformed or discolored, and check whether there is lining paper and backboard at the mercury behind the mirror. The paint should be smooth, flat, free of saliva, wrinkles, and no bumps. The corners should not be right-angled, and the corners are easy to chip off and paint off. Whether the installation of hardware fittings of furniture is complete, regular and reasonable.

7. Excellent material and wear-resistant: E1 grade environmental protection board must be used for the board, and the furniture material must have fire resistance and high temperature resistance; the purchased furniture should have the function of waterproof and moisture-proof. And to have wear-resistant and durable quality, furniture should choose products that can maintain good appearance and quality for a long time, and have a high price-performance ratio.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By zhuangheningbo
Country China
Categories Accounting , Affiliate Program , Architecture
Last Updated December 10, 2020