Plastic Balls Manufacturer shares maintenance methods for plastic surfaces


Posted April 1, 2021 by yuyaojinghaiboo

If you accidentally scratch the table, car or other plastic surface, don't worry. Plastic Balls Manufacturer teaches you to follow the steps below.
 
If you accidentally scratch the table, car or other plastic surface, don't worry. Plastic Balls Manufacturer teaches you to follow the steps below.

1. Clean the plastic. Immerse a clean damp cloth in warm soapy water. Wipe gently around the scratch. When finished, dry the area with a dry and clean cloth.

2. Check the depth of scratches with your nails. Sometimes light scratches can be rubbed. If the nail gets stuck in the notch when you touch it, it means the scratch is too deep. Deep scratches can only be repaired by other methods.

3. Apply toothpaste to a damp cloth. Gentle and abrasive toothpaste helps to remove scratches. You don't need to use it often. Just use a sufficient amount on the fabric to spread on the scratches. You can also use the following ingredients instead of toothpaste, mix two tablespoons of baking soda with a few drops of water.

4. Wipe the scratches into a circle. Wipe all scratches from one end to the other. This rubbing movement will eliminate scratches on the plastic. Continue rubbing until the scratches are no longer visible.

5. Clean and dry the area. If this is the case, wipe the area with a new damp cloth to remove paste and residue. Then, wipe dry with a clean cloth.

6. If the scratch is deep, prepare some sandpaper with different thickness. Wet the sandpaper before use, the emery paper must be wet. This step helps prevent the sandpaper from being too rough and removes dust caused by sanding.

7. Wipe the sandpaper into circular scratches. The roughness of sandpaper contributes to the friction and helps to eliminate scratches on the plastic. However, please be careful to avoid causing new scratches. Continue rubbing until the scratches disappear.

8. Clean the area. Use a clean damp cloth to wipe the area just working. Take a clean new cloth and dry it.

9. Polishing. After the scratches have completely disappeared, polish the area to make it look new again. Prepare a commercial or acrylic plastic polishing compound and wipe the entire plastic scratch area with a clean cloth. Then, take a clean cloth and wipe the remaining polish.

Yuyao Jinhai Glass And Plastic Manufacturing Plant organizes and shares, hoping to help those in need.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By yuyaojinghaiboo
Country China
Categories Accounting , Affiliate Program , Architecture
Last Updated April 1, 2021