China Rubber Rings Factory introduced the design requirements of rubber rings:
1. Allowable amount of leakage. Among the related design schemes, it is very important to allow the amount of leakage required. This is mainly determined according to the use of rubber seals. It refers to the leakage that occurs when the machine is in normal operation and normal operation. The situation is allowed to exist, so please understand clearly when purchasing.
2. Friction. Rubbing will cause damage to the rubber seal, and even damage the convex surface of the parts. Therefore, it is also very important to select the friction resistance of the material and the standard requirements for lubrication when it is used.
3. Damaged. After friction, it will inevitably cause damage. Therefore, when designing rubber seals, it is necessary to reduce its life cycle and wear as much as possible. However, its wear is generally related to the selected raw materials and hydrodynamic wettability. Of course, rubber seals may also cause damage to the shaft, especially when some wear-resistant materials are used, which may cause the rubber seals to wear quickly.
4. Specifications. The equipment of the rubber seal should be as compact as possible, and the selected size should also be determined according to the overall situation of the equipment.
Through the above introduction, China Pe Tubes Company hopes that you can simply refer to the content of this article in future use.