Smart Curtain Motor Exporter introduces what should be paid attention to when installing automatic curtains?

1. Check the support point error of the electric curtain support frame and the tightening level of the screws. Check the tightness of the transmission belt and check the motor output of the controller. Clean the oil and dust in the case and check the wear of each part of the automatic door. Check the main parameters of the working voltage to ensure its normal operation, repair and replace the damaged parts. Car buyers also need to pay attention to the maintenance and maintenance of the induction door. Because of the hazards of the installation quality and the natural environment of the application, it is difficult to avoid problems and problems during the entire application process.

2 If there is a long-term lack of maintenance, the hidden safety hazards and small common faults of automatic curtains cannot be properly handled. After the motor receives a certain amount of current during work, it will move forward, transmitting the driving force to the transmission belt, and then transmitting the driving force to the hoisting equipment. After the system software opens the door, the controller makes a distinction. If the door needs to be closed, it informs the motor to perform reciprocating motion to close the door. It will change from a small common failure to a common failure, which is likely to cause hemiplegia of the fully automatic automatic door. When the magnetic induction detector detects that some people have entered, it sends a differential signal to the main controller. After distinguishing, the main controller notifies the motor to run and also monitors the speed of the motor to notify the motor to increase the output power and enter the slow speed operation within a certain period of time.

3 Internal liquidity. You will most likely need to install automatic curtains to stop one or more indoor wooden doors. Again, this is your customers, employees, and building construction. The remote control automatic retractable door is a kind of electric door retractable door. It is a remote control electric door retractable door, which can further improve your corporate brand image. Operators should pay attention to the actual operation of the automatic retractable door anytime and anywhere to prevent safety accidents. The rails should be cleaned frequently to avoid debris from endangering the actual operation.

4. The controller should be greased once a year, the transmission chain should be filled with grease, and the wear of each component should be checked. Worn parts should be repaired or replaced immediately.

Through the above introduction, Motorized Shades Blinds Manufacturers hopes that you can simply refer to the content of this article in future use.

https://www.wistarmotor.com/