Conventional Safety Valve Manufacturer in USA
SVR Global is the best Conventional safety manufacturer valve in USA supplying top quality valves to marine industries, mining industries and chemical industries in Columbus, Austin, San Antonio. A conventional safety valve is a type of pressure relief valve used to protect pressure vessels and piping systems from overpressure. It is designed to open at a predetermined set pressure and relieve the excess pressure by discharging the fluid from the system.
Conventional safety valves consist of a valve body, a spring-loaded disc, and a seat. The valve is installed in the piping system or pressure vessel with the valve inlet connected to the system and the valve outlet venting to a safe location. When the pressure in the system exceeds the set pressure of the valve, the spring-loaded disc lifts off the seat, allowing fluid to escape through the outlet and relieve the pressure.
PARTS:
• Valve Body: The main housing of the safety valve that contains the internal components and connects to the piping system or pressure vessel.
• Nozzle: The inlet connection of the valve that connects to the process piping or pressure vessel.
• Disc: The spring-loaded component that lifts off the seat to allow fluid to escape when the set pressure is reached.
• Seat: The sealing surface where the disc rests when the valve is closed.
• Spring: The component that applies force to the disc to keep it seated against the seat until the set pressure is reached.
TYPES
• Angle Safety Valve: An Angle Safety Valve is typically used in applications where space is limited, and the valve needs to be installed at an angle. The valve has a spring-loaded disc that lifts off its seat when the pressure in the system exceeds the set pressure. This allows the excess fluid or gas to escape and prevents the system from becoming over-pressurized.
• Open Discharge Safety Valve: An Open Discharge Safety Valve is designed to release the excess pressure by discharging it directly to the atmosphere. It is commonly used in low-pressure systems where the pressure does not exceed a certain level. The valve is set to open at a specific pressure, and the fluid or gas is released into the environment.
• Steam Safety Valve: A Steam Safety Valve is is specifically designed for steam systems. It is designed to open automatically when the pressure in the system exceeds the set pressure. The valve helps to protect the system from overpressure, which can cause damage or even failure of the system.
• Thermal Safety Valve: A Thermal Safety Valve is designed to protect the system from overpressure caused by high temperature. It is commonly used in systems where the temperature can increase rapidly, such as in a steam boiler or a pressure vessel. The valve is designed to open automatically when the temperature exceeds the set value.
• Spring-loaded Pressure-relief Valve: A Spring-loaded Pressure-relief Valve is designed to release excess pressure by opening a valve. It is operated by a spring-loaded disc that lifts off its seat when the pressure in the system exceeds the set pressure. This allows the excess fluid or gas to escape and prevents the system from becoming over-pressurized.
• Pilot Operated Pressure Relief Valve: A Pilot Operated Pressure Relief Valve uses a pilot valve to control the opening and closing of the main valve. The pilot valve is typically a smaller valve that is attached to the main valve. When the pressure in the system exceeds the set pressure, the pilot valve opens, which in turn opens the main valve, allowing the excess fluid or gas to escape. This type of valve is commonly used in high-pressure systems where precise control is required.
INDUSTRIES
• Oil and gas industry
• Petrochemical industry
• Chemical industry
• Textile industry
• Petroleum industry
• Mining industry
• Marine industry
APPLICATIONS
• Protecting pressure vessels and piping systems in oil and gas production.
• Preventing overpressure in chemical processing.
• Safety relief for steam boilers in power generation.
• Pressure regulation in water treatment.
• Pressure relief in mining and minerals processing.
• Preventing paper machine overpressure in pulp and paper manufacturing.

ADVANTAGES
• Protects equipment and personnel from overpressure.
• Can prevent catastrophic failure of piping systems or pressure vessels.
• Easy to operate and maintain.
• Low cost compared to other pressure relief technologies.
• Can be used in a wide range of applications.
• Can be customized to meet specific needs.
• Can be designed for a variety of fluids and temperatures.
• Reliable operation under normal and emergency conditions.
• Compliance with industry standards and regulations.
• Can be remotely monitored and controlled.
• Long service life with proper maintenance.
• tested and certified for performance and safety.


FEATURES
• Quick in operation
• Compact
• Low operating cost
• Low maintenance cost

SVR Global is the Conventional safety manufacturer valve in USA and these valves are very reliable and versatile.
Body Material – Cast Iron and Steel (A216 WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91] , WCB, WC6, SS304, SS316, DUPLEX STEEL.
Class: 150 to 2500.
Nominal Pressure: PN10 to PN450.
Size: ½” to 40”.
Ends- Butt welded, Socket welded, Flanged, Threaded

Visit our site for more information-
https://www.svrglobal.net/products/conventional-safety-valve/