Boxing Training Heavy Free Standing Punching Bag Assembly Steps


Posted April 21, 2020 by taizhouglejin

How to assemble the Boxing Training Heavy Free Standing Punching Bag correctly, let's take a look with the editor.
 
How to assemble the Boxing Training Heavy Free Standing Punching Bag correctly, let's take a look with the editor.

First, open the package and take out the base of the boxing punching bag, which is the red drum in the picture. Lay it flat on the table. At the same time, the included screws and nut wrenches are also placed on the table for easy access.

Secondly, there are screw holes on the top and bottom of the barrel-shaped base, which are prepared for the installation of sandbags and skin suction. Remove 12 of the 14 skin suctions that came with the product for installation, and the remaining 2 spares. The side of the skin suction is a screw, turn the bottom of the barrel up and align the screw with the hole below the barrel base to tighten.

After installing all the skin suction, place it in front of the water pipe and fill the hole with the water pipe. Fill the drum-shaped base with water and seal with spare rubber plug. Open the other package and take out the sandbags and accessories inside. The part where the sandbag and the base are connected is composed of: 5MM thickened steel plate, tendon pad, sound-absorbing layer and fixed support steel plate, etc. We install them in the order of the position in the picture, and fasten with two wrenches.

Next, place the fastened coupling on the barrel base and fasten the two with screws. Now you can install the sandbags. Before installing, please understand the internal structure of the sandbags. These sandbags are filled with internal fillers by the manufacturer, and do not need to be filled by the user. The sandbags are divided into four layers: the first layer is high-density PU leather ; The second layer is the strength buffer layer; the third layer is the highly elastic EPE; the fourth layer is the high density filled fabric core. After understanding the internal structure of the sandbag, next insert the iron pipe end of the sandbag into the iron pipe of the support frame on the base and align the two screw holes. Pass the two longest screws through the two holes, twist the two non-slip nuts on the screw rod, and tighten with two adjustable wrenches. At this point, the overall installation of the boxing punching bag is complete, and you can now exercise.



information about Boxing Training Heavy Free Standing Punching Bag : https://www.atboxingsandbag.com/product/boxing-sandbag/mma-boxing-training-heavy-free-standing-punching-bag.html
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By taizhouglejin
Country China
Categories Accounting , Blogging , Blockchain
Last Updated April 21, 2020