There is an Disposable Syringe Assembly Machine on the sight glass, and there is an oil plug at the back of the box for draining oil. The industry recommends to check the worm gear, worm, bearing and other moving parts for flexibility and wear conditions.. It is widely used in pharmaceutical, chemical, food and other industries.

If it needs to be out of service for a long time, the whole body of the machine must be wiped clean, and the smooth surface of the machine parts shall be coated with anti-rust oil and covered with a cloth hood. When the user turns the screw bolt, the motor will move up and down to adjust the belt. In addition, the industry reminds users that it is necessary to pay attention to the regular maintenance of equipment.

If any defects are found, they should be repaired in time and should not be used reluctantly. It rotates backward and forward through the transmission of the rack, and the front bearing cover on the end face is movable. Among them, the swing granulator is a special equipment that uses the swinging effect of the rotating drum to grind the wet powdered raw materials into granules through the screen. How to lubricate? According to industry introduction,

;The oil is stored in the gearbox, and the transmission parts are lubricated by worm gear with splash type. Open the upper cover of the fuselage to add lubricating oil to the bearings in the center and rear bearing housings. According to the industry, when assembling and disassembling the rotating drum, just unscrew a wing nut, and the bearing cover and rotating drum can be drawn out.

https://www.syringeassemblymachine.com/product/