Take the tablet press as an example. This is the source of power for enterprises to improve quality and efficiency. Specifically, the running speed of the bottle body during labeling should be slightly faster than the labeling speed of the label, so as to avoid the generation of bubbles.　　

What should I do if the label of the labeling machine deviates? 　　 The user can check the installation of the peeling plate and the fixing base. In recent years, the types of labeling machines are gradually increasing, and the Two Pin Assembling Machine skill level has also been greatly improved. Highly intelligent and automated modern pharmaceutical production equipment replaces the production line full of workers in the past, which not only expands the production scale, but also greatly improves the quality of the products.　　

There is a pull rod phenomenon during the labeling process, which will cause the label to be unsmooth.　　 For example, the labeling product just arrived at the labeling position 2 seconds after the product is detected, and the labeling is too early when the labeling product does not arrive after 1.　　

The static electricity must be completely eliminated before labeling, so that the label will stick out of the label and separate from the backing paper. There is no reason to choose film materials with suitable characteristics according to the material of the bottle body. The bottle body should be washed and dried first, and according to the surface shape of the bottle body, it is clamped and fixed by a conveyor belt during labeling, especially for flat plastic bottles. The following author sorts out the failures and solutions that the labeling machine often encounters during the use process.　　 .

Among the crowds, who is more successful in the construction of scientific and technological innovation platform, and the cultivation of innovative talents is more mature, and the ability to transform scientific and technological achievements is better. If they are not parallel, that is, the peeling plate and the head plate are not perpendicular, the label of the labeling machine will stray. The long-term use of the stripping plate will cause the stripping port to be worn, with one side high and the other low, which will also cause uneven pulling force and cause the label to run off.　　 The force of brushing the label is too large, the surface of the bottle body is not flat, and the bottle is clamped by the wheel attachment mechanism is too tight; the frequency of labeling is too slow, and the obvious pulling of the label on the product is the cause

https://www.syringeassemblymachine.com/product/infusion-group-installed-series/sq-66-automatic-assembler-machine-for-infusion.html