How to carry out in-mold paste for 20L Bucket Mould. First of all, there must be a pair of in-mold paint bucket molds. The design method of the in-mold paint bucket molds is different from that of ordinary paint bucket molds. When the product is designed, a limit of 0.1mm is designed in the film area. I have posted a lot of articles before the mold, I will not say more
1. Put the mold on the injection molding machine
Second: Debug the injection molding machine
In the debugging of the injection molding machine, it is necessary to ensure that the product can be filled and the product can come out after the mold is opened, and the position of the filming manipulator must be retained.
Finally: the debugging of the in-mold paste system (the debugging is mainly to test the matching of the mold, the injection molding machine, and the in-film paste system)
The manipulator of the in-mold sticking system first begins to program the action position, because the action is more complicated, the debugging must be done by professionals, and after the action is programmed, the test and debugging must be repeated. To ensure accuracy. Then start to take the label and paste the film. The paste is electrostatically adsorbed. Because the position of the film is very accurate, the precision of the robot in the in-mold paste system is very high, otherwise it will fall or be crooked.
Precautions
The production accuracy of the in-mold paste mold is also very demanding. In addition to achieving the appearance accuracy of ordinary paint buckets, the accuracy of the film must be guaranteed. Electrostatic adsorption has strong static electricity, and personal safety needs to be paid attention to. 18L Bucket Mould is also our product, welcome to consult and contact us.