You've bought your new chainsaw after doing a little market research and are glad that your hard-earned money was well spent. If you bought your saw from a local store, you may have received a short description of how to use your On the other hand, you could have ordered your chainsaw online, in which case, if you have never used a chainsaw before, you will not be familiar with the chainsaw safety or how to get the best performance from your new purchase. In this article, we will try to explain the basics of using your chainsaw safely and efficiently, ensuring that with a little practice, you gain confidence and competence in performing a variety of household tasks.

Work environment

Allow Suppose you bought your new chainsaw to prepare firewood for the winter months and that felling will be your main occupation when using the saw. If you haven't already done so, it is advisable to buy a good quality easel to hold it up. mber in place while you are registering. Before starting work, think about your work environment and where to best locate yourself and your tools. Ideally, a clear, flat space with at least 5 meters of clearance in all directions will be best

Know your chainsaw

It is imperative that you read the entire instruction manual that is provided with your chainsaw. provide a chainsaw safety video or DVD; check this out too. With your new saw on a bench or table in front of you, familiarize yourself with all the controls, especially the safety controls which are there to prevent accidents. All saws from different manufacturers will vary but most will have the following safety features. , whether the chainsaw is electric or gasoline:

At the bottom of the saw there is a small metal bar which goes under the chain, it is the chain catcher, it is there to catch the chain in case of breakage or The throttle and trigger lockout controls are critical to chain saw operation, both will be located on the chain saw's rear handle, with the throttle lock preventing accidental depressing of the
throttle trigger
A stop control button or lever is placed on the back of the saw, within reach of your thumb to allow you to quickly stop the engine when needed

Along the part ie bottom of the rear handle, you will notice a wide, flat guard. is designed to protect your right hand in the event of chain breakage or derailment.It is also used when starting the chain saw, allowing you to place your foot on the guard while pulling the recoil rope to rotate the chain saw. engine. the chainsaw is the chain brake. It is the lever located in front of the upper handle and is activated either manually by pushing it forward, or by inertial forces which are the result of a dangerous rebound, encountered when the upper half of the nose of the bar chainsaw (the kickback zone) comes in contact with something unexpectedly, forcing the chainsaw up and back

What are you wearing?

A strange question you might think of when you are about to use a chainsaw, but one that you need to think about a bit. important to protect yourself in the event of an accident.In an ideal world, you would wear the right safety gear from head to toe, but it is not always practical or within your budget. At the very least, make sure that you are wearing clothing made from heavy, tough materials and a sturdy pair of boots with a sturdy toe cap.Gloves should be thick, but you should be able to move your fingers freely to properly operate the chainsaw safety controls . However, if you only buy one chainsaw garment, make sure it is a safety helmet designed specifically for chainsaws.Facial injuries from chainsaw accidents are often the most serious. and a chainsaw helmet will go a long way.They come with a face shield and earmuffs and aren't always as expensive as you often think. Buy one!

Getting Started

Now that you are familiar with your chainsaw and have the correct safety equipment, you can get started! Before doing so, check the chain. On a new saw, the chain will be sharp but after a little use it will stretch and loosen. You must become familiar with the chain tensioning device on your particular saw and learn how to use it. Chain sharpening is also of great importance. You must learn to use a chainsaw sharpener or file to keep the chain in optimum condition, before using the chainsaw. Here are some more safety tips:

Follow the manufacturer's fuel mixture guide if you are using a gasoline machine and be careful not to overload the saw. the owner's manual and follow the start-up procedure for your particular chainsaw model.

Remember to check that the safety brake works correctly by pressing the accelerator and applying the brake at the same time, you must stop the chain immediately.

Test the chain lubrication by holding the chain saw guide bar on a light colored surface (e.g. newspaper) .Rotate the saw, a thin trail of oil should be visible.

Use a chainsaw, practice. Start by cutting a few small logs before moving on to the bigger things, and remember that this can be tiring work. Do not try to do everything at once, instead start with small bursts and gradually increase your working time.Hold the saw firmly on both handles and do not be afraid to keep the chainsaw close to your body.This will provide a better balance and put less strain on your back, as will a wide stance with your feet apart and knees bent.

Beyond Logging ...

Once you are familiar with your saw, you can move on to other projects around your property such as tree pruning or construction work. Try to learn how to use both sides of the chainsaw guide. Will will notice that when you use the top of the bar, you encounter what is known as a chain, using the chainsaw to literally work towards you. the principle of using the lower part of the chainsaw bar to pull the remover from your hand, which is known as the pull-out. Asterk these techniques will give you greater confidence when using your chainsaw and gradually reduce the time it will take you to complete certain tasks. 400
you are looking for Powersharp system from Oregon online then you need to know more about it first. Does it really work? Does it cut along with the standard format? But of course you should know where to get the best out of it too.

Oregon is a major supplier of high-performance, high-performance, high-performance vacuum cleaners for industrial equipment manufacturers. Their latest innovation is a new type of bond that can be worn anywhere in seconds with special applications and short videos. of wood chainsaw. The Powersharp system completely relieves the average user from the need for conventional chainsaw sharpeners, filing, or professional sharpening services.

Traditional chainsaw chain must be sharpened carefully to maintain its cutting performance. The chains gradually become dull with use until performance is greatly reduced and the saw becomes difficult or even dangerous to use. If you hit a stone or metal or slide the saw against the ground, the chains will dull much faster! It's annoying if your saw has just been sharpened. To sharpen the chain, each cutter must be sharpened individually. A file or grinder needs to be applied at the correct angle. A time-consuming process that requires the right tools and a little technique. This can be a big task for the occasional chainsaw user and even experts often find Sharpening uncomfortable.

The Powersharp system completely overcomes the problems the average user has in keeping their chainsaw sharp. And it really works. It consists of 3 parts: the special and redesigned Powersharp chain, the chain bar and the Powersharp sharpening unit. The bar and the Powersharp unit only need to be purchased once. Replacement chains are available separately and are packaged with a replacement. grinding stone for sharpening unit. In use, the Powersharp chain works well compared to the equivalent standard chain. In fact, in testing the Powersharp chain was found to be a bit faster than the standard chain. In addition to the high working speed, the Powersharp chain appears to last longer before re-sharpening is required. When it inevitably becomes dull, the sharpening process is really simple.

All you need to do is place the Powersharp unit over the end of the chainsaw bar. This is easy even with thick gloves. There are two alignment pins that go through special holes in the end of the motor sharpening bar to align everything on top. Turn off the unit, start the saw and spin at full speed. Now the sharpening process alone takes an average of 3 or 4 seconds and all you need to do is push the saw and sharpening unit against a solid object. A handy tree stump will do. A few sparks fly and just turn off the power. engine, release the sharpening unit and you're ready to cut again with a freshly sharpened saw.

Relevant Source: https://reviewsandbuyingguide.com/best-chainsaw-bar/