We are one of the door hinge manufacturers, here is the information about door hinges.
The door hinge includes: a hinge seat and a hinge body. One end of the hinge body is connected to the door frame through a mandrel, and the other end is connected to the door leaf; the hinge body is divided into two sections, one section is connected to the mandrel, the other section is connected to the door leaf, two sections The body is connected into a whole through a connecting plate, and the connecting plate is provided with a gap adjustment hole for the door gap. Since the hinge body is divided into two sections and connected into a whole through the connecting plate, the door leaf can be removed for repair by removing the connecting plate. The door gap adjustment holes of the connecting plate include: long holes for adjusting the gap between upper and lower door gaps and long holes for adjusting the gap between left and right door gaps. The hinge can not only be adjusted up and down, but also left and right.
installation method
1. Use 2 screws to install the hinge cup on the hinge hole of the cabinet door (usually open the hole in advance);
2. Install the hinge seat on the side panel of the cabinet;
3. According to the installation situation of the door hinge and the cabinet body, adjust the door hinge to realize the gap between the cabinet door and the cabinet door, and the gap between the cabinet door and the cabinet body is the most even;
4. Through the height-adjustable hinge base, accurate up and down height adjustment can be achieved;
5. After adjusting the gap, the screw holes on the door hinge should be filled with screws to ensure the service life of the door hinge. We are also a window handle manufacturer, welcome to consult and contact us.