A hybrid PC or a hybrid circuit is a small form of the electronic circuit that consists of the individual devices like the semiconductor ones like the transistors and diodes and the passive components including the resistors, inductors, and capacitors which can all be sustained on one small boar call the substrate or the printed circuit board (PCB). You can say that a hybrid multilayer PCB consists of layers of PCB all of which had various electronic components added onto it to make a perfect using material. Since the construction and manufacturing process might differ, the type of hybrid layer generated might differ too. When it comes to hybrid PCB, they are known for their small size which provides various advantages like the versatility of the film and the features sizes that can help you to further improve the integration circuit and work in a better manner. The composition and the dimensions of the resistors have to be selected to achieve the desired value and the final resistor values us what determines the design and the active laser trimming.

The following are the various advantages of including in the hybrid tec and developing the hybrid circuits.

1. The components which cannot be included in the monolithic IC can be included in the hybrid circuit without any problem. These components are the capacitors of a large value, the wound components, the crystals, and the inductors.

2. The design of the circuit provides you with the complete freedom of choosing the resistor value in the thick film technology.

3. The dimensions and the composition of the resistors can be selected in such a manner so that they can produce the desirable value.

4. The value of the final resistor will depend on the design which can be achieved by laser trimming.

5. In case you want to fine-tune into the final test which can also be achieved with the help of the active laser trimming.

6. Several modern technologies use the knowledge of the hybrid circuit to allow the embedding of the components within all the layers of the multi-layer substrate in addition to the components that are placed onto the substrate.


Contact Information:


Hybrid-Tek, LLC
9 Trenton Lakewood Road
Clarksburg, NJ 08510

Phone: (609) 259-3355
Fax: (609) 259-3539
https://www.hybrid-tek.com/