Plastic quality household mould You Can Choose


Posted August 21, 2020 by HouseholdMould

The above is how the plastic mold factory handles the silver wire. If you want to know more about injection molding, please contact us.
 
With the development of society and the increase of manufacturers, products are the main force for manufacturers to compete with their peers. Whoever has a good product will have a deal, then silver thread will be a part of the product quality, so you must know that it is What caused the silver thread can be solved. How does the plastic mold factory handle Plastic quality household mould/moldthe silver wire?   
The silver wire is mainly caused by the moisture absorption of the material. Therefore, it should generally be dried under the condition of 10-15C lower than the thermal deformation temperature of the resin. For the more demanding PMMA tree wax series, it needs to be dried for 4-6h under the condition of about 75t). Especially when using an automatic drying hopper, a reasonable capacity should be selected according to the molding cycle (molding volume) and drying time, and the material should be turned on and dried a few hours before the injection.  
In addition, too long the stagnation time of the material in the material cartridge will also produce silver lines. When mixing different kinds of materials, such as polystyrene. It is not suitable for mixing with ABS resin, AS resin, polypropylene and polystyrene.  
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By plastic mould
Country China
Categories Blogging
Tags mould , plastic
Last Updated August 21, 2020