Mining Ball Valves Factory Introduces Disassembly Instructions For Ball Valves


Posted May 12, 2022 by honggeyeya

Mining Ball Valves Factory introduces the installation and disassembly instructions of hydraulic high pressure ball valves:
 
Mining Ball Valves Factory introduces the installation and disassembly instructions of hydraulic high pressure ball valves:

Ball valve installation instructions:

1) Not limited by the installation direction, the flow direction of the medium can be arbitrary.

2) Leave room for the valve handle to rotate.

3) The ball valve with transmission mechanism should be installed upright.

4) High-pressure ball valves and hard-sealed ball valves have installation direction requirements. If the direction is incorrect, there will be internal leakage.

Ball valve disassembly instructions:

1) Keep the valve in the half-open position, flush and remove the dangerous substances that may exist inside and outside the valve body.

2) Close the ball valve, remove the connecting bolts and nuts on both flanges, and then completely remove the valve from the pipeline.

3) Disassemble the drive device in sequence - handle, positioning plate snap ring, positioning plate, gland, remove the body cover connecting bolts and nuts, and remove the valve cover.

4) Separate from the valve body and remove the bonnet gasket. Make sure the ball is in the "closed" position, which will allow it to be easily removed from the body and then the seat. Gently push the valve stem (4) down through the hole in the valve body until it is completely removed, then take out the O-ring and the packing under the valve stem.

5) Note: Please operate carefully to avoid scratching the surface of the valve stem and the sealing part of the valve body stuffing box. Installation and disassembly instructions for ball valves.

Through the above introduction, High Pressure Floating Ball Valves Factory hopes that you can simply refer to the content of this article in future use.

https://www.hydraulicballvalve.net/
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By honggeyeya
Country China
Categories Accounting , Affiliate Program , Architecture
Last Updated May 12, 2022