The box of the reducer can be made into straight wall and curved wall


Posted January 27, 2021 by hexahedron

The box of the reducer can be made into straight wall and curved wall
 
When the technology of some reducer manufacturers fails to reach the target, the casting and welding of the reducer case body and cover cannot meet the requirements of users. The welded gear box is light in weight, saves materials, and has a shorter production cycle. So what is the difference between casting and welding? The cast gearbox has good rigidity, easy to obtain beautiful appearance, suitable for mass production, especially the gearbox made of gray cast iron is easy to cut, but the cast gearbox is relatively heavy.

The box of the reducer can be made into straight wall and curved wall.There is no doubt that the application field of the reducer is very wide. The former has a simple structure but heavy weight, while the latter has a more complicated structure but lighter weight.. For example, what materials are cast from the box body and the box cover, the intuitive components of the reducer? What are the requirements when casting? The case and cover of the reducer are usually casted from HT-15—33 or HT20—40 gray cast iron.

Because the gear box body and the box cover are very complicated components in the structure of the reducer. Therefore, when ordering a reducer, it is recommended to find a manufacturer specializing in the production of reducers. When designing the gearbox and cover of the reducer, it is required to meet the requirements of strength and rigidity, as well as its compact structure, convenient casting, light weight and use. However, apart from professional and technical personnel, few Worm Gearboxes Manufacturers users know about the casting materials and methods of the reducer.

But the demanding welding technology is only suitable for single piece production. Single-piece production can also be welded by steel plates, and the box body is still made of castings, while the box cover is made of welded parts. This leads to problems such as low heat dissipation performance, short service life, and numerous failures of the reducer
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By reducer
Country China
Categories Advertising
Last Updated January 27, 2021