A Complete Waterproofing Checklist for your Home


Posted October 21, 2019 by FlexContracting

Check your basement walls for wetness or seepage. The easy way to do this is to take a 12" piece of aluminum foil and tape it against the surface of the suspect wall. Seal all the edges closed.
 
Before you call in an expensive waterproofing contractor, you should use this do-it-yourself checklist to see if your water leak problems are caused by something other than poor waterproofing.

Gutters

Inspect and clean your gutter and downspouts. Over time even the best of roofing drainage systems can become blocked or the waterproofing troughs develop holes or breaks at the seams. To test your system, remove any leaves, debris or twigs from all the gutters and downspouts.

Then use a garden hose to run water along the troughs and drains for at least 5-10 minutes to make sure the water is being properly carried away.

Foundation

Inspect the slope of the soil and grounds around your foundation. Make sure that any water runs down and away from the house for at least a distance of 48" to 60". If the water doesn't drain way, it could pool up and run backwards into the house causing water damage and mold problems.

Leaks

Check under your sinks, toilets etc for leaky valves or faucets. Also use a flashlight and trace all the water lines down through the house into the basement or crawlspace. Be certain to check the pipes as the come into the house. Remove any loose dirt or rock to look for drips along the lines. Have any waterproofing structures repaired as needed.

Supply Lines

Check the water supply lines for leaks and drips along their joints. Over time water pipes covers or weatherproofing can rot or deteriorate allowing freezing cold to affect the waterproofing around pipe fittings and elbows. To test for leaks turn off all water in the house, even your icemaker. Read your water meter. Now wait 30-60 minutes and read the meter again. If the meter has changed you have an undetected leak. If you have a leak, you need a plumber not a waterproofing pro.

Basement

Check your basement walls for wetness or seepage. The easy way to do this is to take a 12" piece of aluminum foil and tape it against the surface of the suspect wall. Seal all the edges closed. Now just wait a day or two and check the foil. If is wet on the outside this comes from condensation; if it's wet on the inside this comes from seepage. Check with a waterproofing expert about any seepage.

Rainwater

Test for rainwater problems. If you think that rainwater or water runoff from your property, the street or a neighboring yard is running along the surface and reaching the foundation then you need to grade your property. If it is not a gradin, contact a local waterproofing specialist for a quote.

Check http://www.flexcontracting.com for more details.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By Flex Contracting
Country United Arab Emirates
Categories Business
Last Updated October 21, 2019