After each set of spindle China Colorful Yarn Company and disks with stable operation is pulled out, it must be inserted vertically into the small hole of the spindle maintenance trolley (station equipment). If the tension is too large, the frictional resistance in the spindle increases and the energy consumption of the spindle is increased. 4. It is based on more than 10 years of product development and production experience. After inserting the spindle, it runs at a low speed (6000--8000kr/min) for 8 hours.

. From the perspective of the use of the enterprise, in order to improve the retention rate, the doffing process is adjusted according to different yarn counts, different fiber attributes, and different strengths; consider ensuring that the ring passes through the cut yarn In the case of a spinner, maximize the diameter of the cutter to ensure the angle of the cutter; consider different transformation schemes for different spinning models, replace the middle wall panel for the TH518 spinning machine, select the ZD4211FA for the height of the main shaft and the length of the dragon bar Spindles to meet the transformation requirements; for the FA506 spinning machine, using the lower spindle and the height of the dragon bar to choose ZD4211B spindles,

the transformation requirements can be met without changing the middle wall panel; at the same time, the requirements of the variety of the spun yarn on the volume and spindle speed are made. Refusing to use bobbins with cracks, falling blocks and bending deformation, otherwise the vibration of the spindle will be greatly increased, thereby increasing the extra energy consumption of the spindle ., Ltd. 5.

Don’t rush too much, and don’t miss the refueling! Leak refueling will definitely burn out the spindle. The cross section from the short bar to the car surface must be adjusted Up to 365, the starting height of the spindle is 78mm, the height of the dragon bar to the center of the spindle is 35mm, the height of the aluminum rod above the cutter is 180. The above options. Adjust the tension of the spindle belt and keep it consistent. The small hole of the spindle maintenance plate (workplace appliance) is numbered., Ltd

Hangzhou Dingkai Chemical Fiber Co., Ltd.

Add:988 Shenda Road, Jingjiang Street, Xiaoshan District, Hangzhou City, Zhejiang Province

Tel:+86-0571-82912975

+86-0571-82912977

E-mail:[email protected]

[email protected]

[email protected]