Essential guide to Loft Conversions

Posted October 10, 2018 by architecturefirm

KPCL Architecture has been successfully delivering construction, property and architectural work throughout London and Greater London. Although having competitive prices we ensure that we supply the highest standards of work possible.


October 10, 2018 — Loft conversions are small alterations were you add more value to your property by increasing livable space in your home. Be it a bedroom with an en suite, gym, and office or entertainment room for the family. A loft conversion is an easier process of expanding space in your current building instead of having to move home to find the perfect space for you. Plus this way you get to designing your dream space.
Before we can start designing your perfect space, our colleague will have to site your house to measure out and have a consultation with out about your improvement to your house. The main points will be seeing if there is enough head height in your roof, the pitch and the type of structure in the roof. This way the consultants can advise you if there will be needed any structural beams to support the loft conversion, as some houses that were built after 1960s use thinner and cheaper timber as most were factory made rooves.

You can check yourself if your roof space is suitable for a conversion by checking these simple steps.

First is to check if the internal height of the existing roof, from the top of the ceiling joist to the bottom of the ridge timber is more than 2.2 meters. This will give you more space internally as you will need insulation and plaster board to cover the structure.Secondly, is the pitch of your roof, this is generally 30 degrees or more which is ideal for the centre to be head height.
Thirdly, you will need to check the footprint (perimeter) of your existing roof space. The internal walls should measure 5.5meters to the side including your chimney and 7.5 from to back. If you are close to these measurements then you should be able to convert your roof space to a loft (without a dormer conversion).
There are different types of roof conversions, a ‘room in a roof’, a ‘dormer loft’ and ‘raising the roof.

A ‘room in roof’ loft conversion includes:
The reinforcement of the floor
A couple of skylights
A staircase to the loft
Added insulation
Electrics, lighting and heating
Fire safety measures to comply with building regulations such as fire doors and smoke alarms
A Dormer loft Extension doesn’t require too much construction to the roof. This increases the head height with dormer windows which gives you the option to design the placement of the stairs more freely.

Raising the roof is done when there is less than 2.2 meters head height as this is a minimum space for someone to stand in the loft. This is the most expensive out of the option as it removes or rebuilds the existing roof. It also requires planning permission approval from local authorities with an addition cost.

This measurement all go into account as there is a required application for planning permissions that need to be accounted for. The designers will calculate the maximum volume you could have for your loft conversations. A terrace house is allowed up to 40 cubic meters and a detached or semi- detached house is allowed up to 50 cubic meters.

No roof extensions are allowed to be higher than the highest part of the roof, and the roof is not allowed to hang over the existing outer wall as there needs to be a setback of 20 cm from the eaves. The materials have to be similar or appear to be same as the existing dwelling so they blend in.

For any types of services visit:
-- end ---
Contact Email [email protected]
Issued By KPCL Architecture
Phone 2075365536
Business Address 28 Vicarage Lane, Stratford, London,, United Kingdom
Country United Kingdom
Categories Architecture , Blogging , Services
Tags Planning Application , Residential planning application , Architectural Services , Best architecture firm in London , loft conversion , residential architect in east london
Last Updated October 10, 2018

Latest News on October 18, 2018

global Walking Assist Devices Market Segmentation by Product Type. On the basis of Product Type, it is segmented Gait Belts & Lift Vests, Canes, Crutches, Walker, Wheelchairs and Power Scooters.
SEO Services Australia helps businesses take advantage of their local market. They provide local search engine optimisation (SEO) campaigns that build better online presence, helping local businesses thrive with digital marketing.
Americas Blood Glucose Test Strip Packaging Market By Types and By Region (US, Canada and Latin America) | Forecast to 2021
If you are wondering where you will find AOR Estro Adapt food Supplement, then you need not have many worries, they are readily available at
Improve marketing, bring software development in-house, turn around a legacy project, or experiment with AI! We help you build a solid and future-proof digital foundation for your business.