Free Press Release

FaceBook Page Twitter Feed
 
You are here: Home > All News > How to Install Cork Tiles

How to Install Cork Tiles


Posted Jul 16, 2014 by tedmark
You may have heard about cork because of the products that are used to preserve the quality of the wines or because of the backboards that are used for tacking memos.
 

FOR IMMEDIATE RELEASE

Pressnews.biz (Press Release) Jul 16, 2014 -- You may have heard about cork because of the products that are used to preserve the quality of the wines or because of the backboards that are used for tacking memos. However, few people know how great cork is for insulating the home. a cork tile is actually more resistant than many other materials. That is the reason why cork flooring is recommended if you are looking for good quality and comfort. Besides that, it is also very easy to install and you can even do it on your own!
The cork has great insulating properties, as it is resistant to all weather conditions and it has sound dampening properties. Its ability to return to its original size in any condition makes it also a pleasant and comfortable material. If you are looking for warm and cozy floors, cork tiles must be your choice. This material is also easy to maintain. All you have to do to protect it is to sweep and vacuum. In fact, cork has antistatic properties, which means that you don’t have to use detergents to wash it all the time.
If you are planning to install the cork tiles on your own, you should follow a few simple steps. Keep in mind that if you have concrete sub floors, it should be at least 30 days old. The ideal temperature is around 21 degrees Celsius and the tiles should be acclimatized for 24 hours before being fitted. Before you get started, you should also check for flatness. If there are bumps higher than 4 mm, you should sand them down.
The first step after that is to start placing each cork tile lengthwise with the direction of the sunlight. Remember to pay attention to color harmony and consistency. In the case of concrete under-flooring you must use polyurethane sheeting to create a moisture barrier. After this step is finished, measuring should be done in order to determine how many tiles are necessary to cover the ground. When you start placing the first cork tile, don’t forget to leave a gap of 10 mm between the flooring and the wall or other obstacles.
After you finish the first row, you can start with the second one. Every tile must be inserted at a 20-30 degree angle in order to fit the tongue ridge of the plank to the groove of the first one. It may be necessary to use a crowbar and a mallet once you reach the end of the row to place the last tile. Continue doing the same until you manage to place them all. You can make measurements during the whole process to be sure that you keep a uniform length of the gap between the wall and the flooring.


For quality and affordable cork tiles http://www.corkfloor.us , you can contact iCork Floor LLC, a company that provides materials directly from the factory at very competitive prices. Keep in mind that the cork tile http://www.corkfloor.us is easy to maintain and you will be more than impressed by the final results.
-- EOF ---
Contact Email : tedm...@Stop.ro
Issued By : tedmark
Country : United Kingdom
Categories : Business
Last Updated : Jul 16, 2014

New Press News

blog comments powered by Disqus
Popular TagsMore
CategoriesMore
CountriesMore