The above is about the introduction of copper clad aluminum wire


Posted May 27, 2021 by wireenameled

Copper-clad aluminum wire refers to a wire with an aluminum core wire as the main body and a certain proportion of copper layer plated on the outside, which can be used as a conductor for a coaxial cable.
 
Copper-clad aluminum wire refers to a wire with an aluminum core wire as the main body and a certain proportion of copper layer plated on the outside, which can be used as a conductor for a coaxial cable. The above is about the introduction of copper clad aluminum wire, High quality Polyester Enameled Copper Wire manufacturers I hope it will be helpful to you all. In addition, it has the composite characteristics of the conductivity of copper and the low density of aluminum, so its application range.

Copper-clad aluminum wire refers to a wire with aluminum core wire as the main body and a certain proportion of copper layer plated on the outside. It can be used as a conductor for coaxial cables and wire and cable conductors in electrical equipment, such as connecting wires for home audio. Because the high-frequency signal has the characteristics of 'skin effect', the copper-clad aluminum wire has the same conductivity as pure copper wire when transmitting high-frequency signals.What is copper clad aluminum wire, do you know? Let me introduce it below. The above is the reason why the enameled wire cannot be soldered with tin.

The tin temperature is not high enough to melt the paint. Because there is a layer of grease on the outer surface of the enameled wire, it can play a role in insulation. It is not possible to use straight-welded enameled wire. Because the tin temperature is not high enough, the paint is not melted, so the tin can not be soldered. Because there is a layer of grease on the outer surface of the enameled wire, it plays a role of insulation. Oxidation of the soldering iron tip. What are the general reasons why the enameled wire cannot be soldered with solder?

Let me talk about it below. The enameled wire used is not straight-welded, so you need to scrape off the paint on the enameled wire before welding. The above are the reasons why the enameled wire cannot be soldered, I hope it will help you.Do you know the reason why the enameled wire cannot be soldered with tin? The following editor will talk about it. Therefore, if the outer layer of grease is not removed, the tin cannot be bonded..
https://www.fd-enameledwire.com/product/copper-eneamelled-wire/qz-2-130l-polyester-enameled-copper-round-wire.html
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By FUDA
Country China
Categories Accounting , Agriculture , Banking
Tags high quality polyester enameled copper wire manufacturers
Last Updated May 27, 2021