Safety issues of villa elevators


Posted August 12, 2020 by Webstar

When installing a villa elevator, while considering it to bring a comfortable ride, you must also consider its cost performance. At the same time, the most important thing to pay attention to is its safety performance.
 
When installing a villa elevator, while considering it to bring a comfortable ride, you must also consider its cost performance. At the same time, the most important thing to pay attention to is its safety performance.
1. Overload protection function of home villa elevator
Like ordinary passenger elevators, a device similar to an electronic scale is installed at the bottom of the home elevator car. Once the load weight of the home villa elevator itself is exceeded, the elevator will sound an alarm and will not run, and always keep the door open. , To ensure the safety of users.
2. Rope break protection function of home villa elevator
The speed limiter and safety gear are installed in the machine room of the home villa elevator. The speed limiter is a machine that detects the speed of the elevator and sets its maximum speed limit. The safety gear is installed on the bottom of the car and is a device similar to a brake. Once the wire rope of the home villa elevator breaks, the speed of the car falling rapidly exceeds the speed limit. The maximum speed limit set by the speed limiter, the speed limiter will clamp the wire rope and pull the safety gear to lock the car on the guide rail to prevent the car from continuing to fall and ensure the safety of users.
3. The ultimate protection function of home villa elevator
Limit switches are installed in home villa elevators. It can be reset automatically. When the home villa elevator runs to the upper limit position, the limit switch works. The villa elevator cannot continue to go up, but the elevator can go down at this time. When the elevator goes down, the limit switch is automatically reset.
4. Self-rescue function of home villa elevator
The operation of the home villa elevator needs power supply. When it is not running, it is in a standby state and consumes almost no electricity. The electricity consumption is also very small in normal use. Once the home power supply system is disconnected, the home villa elevator system can automatically recognize the current When the car is loaded, it will automatically run to the nearest leveling, open the car door, release the user, and the car door will remain open for a long time, waiting for inspection, it is same as Passenger Elevator Factory.
https://www.webstarelevator.com/
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By Webstar
Country Australia
Categories Advertising
Tags passenger elevator factory
Last Updated August 12, 2020