Electric Vehicle Manufacturers Introduces Battery Discharge Methods


Posted November 25, 2020 by taizhousuqier

Electric Vehicle Manufacturers introduced that the batteries of electric vehicles need to be deeply discharged regularly:
 
Electric Vehicle Manufacturers introduced that the batteries of electric vehicles need to be deeply discharged regularly:

A regular deep discharge of the battery is also beneficial to "activate" the battery, which can slightly increase the battery capacity. The general method is to fully discharge the battery periodically. The method of full discharge is to ride the bike to the first undervoltage protection under normal load conditions on a flat road. Note that we especially emphasize the first undervoltage protection. After the battery is under-voltage protection for the first time, after a period of time, the battery voltage will rise and return to the non-under-voltage state. At this time, if the battery is used again, the battery will be seriously damaged. After the complete discharge, the battery is fully charged. You will feel the battery capacity has improved.

Pay attention to the charging environment: the best environment temperature for charging is 25°C. At present, most chargers do not have an automatic control system that adapts to the ambient temperature, so most chargers are designed according to the ambient temperature of 25°C, so charging at 25°C is better. Otherwise, the problems of undercharging in winter and overcharging in summer are inevitable. When the ambient temperature is really 25°C, it is relatively low, so there must be a problem of overcharge in summer and undercharge in winter. Fortunately, most households now have the conditions for indoor temperature regulation. In this way, when charging, it is best to arrange the battery and charger in a ventilated and temperature-regulated environment. It is particularly reminded that when the battery is in the northern winter and enters a warm room at a low outdoor temperature, frost and condensation will appear on the surface of the battery. In order to avoid battery leakage caused by frost and condensation, you should charge the battery after the battery temperature rises to close to the indoor temperature and is dry!

Through the above introduction, Sport High Power E-Bike Manufacturers hopes that you can simply refer to the content of this article in future use.
-- END ---
Share Facebook Twitter
Print Friendly and PDF DisclaimerReport Abuse
Contact Email [email protected]
Issued By taizhousuqier
Country China
Categories Accounting , Affiliate Program , Architecture
Last Updated November 25, 2020