Piping Specification


Posted March 4, 2020 by SafeGas

The quoted line, for example, is 12-FW-1014-1CS1P in system and instrument diagram. 12–Nominal tube length can be deciphered accordingly.
 
Pipe specification is a prepared document, abbreviated as' pipe specifications,' which lists pipe specifications and their components for a specific service. It also provides additional requirements for products beyond expectations during the draft plan's design phase.

Pipe specifications give the following meanings and instructions for specific purposes: model-minimum thermal expansion specifications, allowance levels, etc.

Procurement–here is a list of material requirements, including heat treatment, beyond permitted standards.

Assembly –includes assembly, welding and mounting instructions on the tube system. This also speaks to painting and washing methods.

Description: construction–description of how to prepare designs and set the factory.

Besides being used during construction phase, the Piping Specification Manual also enables repairs and maintenance. Since the pipe specification includes all information about some part of the piping system, it is a key guide for any system changes.

One argument about the pipe spec report is that a specific part of the plant or building is designed. This means that knowledge on one pipe specification can not apply to another section, and it is necessary to indicate which section the pipe specification is intended for.

Unlike pipe specifiers, short codes and numbers provide as much accurate information as possible. To use the text optimally, it's important to understand how to read a pipe spec.

The quoted line, for example, is 12-FW-1014-1CS1P in system and instrument diagram. 12–Nominal tube length can be deciphered accordingly.

FW –refers to tube content, often referred to as service code. In this example, FW stands for firewater.

1014 –This is the pipeline number, a special number assigned to a specific section or pipe run. During the design phase, this information is put.

1CS1P–This is the pipe specification number file shorthand reference. This document is unique, the first number usually refers to the system pressure level.

Upon finding the pipe specifier number, you can go to the specific page on the paper to get all the required information.

Check the https://www.safegas.com.sa
-- END ---
Contact Email [email protected]
Issued By SafeGas
Country Saudi Arabia
Categories Business
Last Updated March 4, 2020