26-12-2019/San Jose/California- Netgear authorized executives team shared comprehensive information with the Arlo security camera users on the Arlo Setup process. How users can set up their Arlo camera without any kind of issue. Also, they told about the problem which users get while setting up the camera. And what type of inappropriate steps users take. The team said to the Arlo users by using this security camera you will get all the security notification on your device which you are currently using or another device you install the Arlo application. When you have synced your camera with the Arlo base station, that time you are allowed to use all the Arlo camera’s features.

Significant process for Arlo security camera Setup!

The team said when you buy the Arlo security camera for keeping your house safe, then you will have to perform some required steps. Also, you have to keep in mind this system is restricted from your personal information. So, you shouldn’t share it with any other people.

Required steps
● The solicitor’s team said you need to open the battery compartment carefully by pressing the latch & pulling it very gently.
● After that, you should insert the battery in a pertinent manner. After inserting the battery in the camera close the battery door carefully.
● Now, you need to bring your Arlo security camera one to three feet of the Arlo base station for a batter streaming/performance.
● Next, you will have to sync your camera with the base station.
1- When you use the Arlo base station, then you need to press the sync button on the side of your base station. You need to press the sync button approx two seconds & then you need to release it.
2- In case, you use the Arlo Pro 2 or Pro base station, that time you have to press the button which is available at the top of the base station about two seconds & then release it.
● You need to wait unless sync status LED blinks in green.
● Then, press the sync button again on the top of the camera approx two seconds & then release it. (if the blue LED on the camera blinks continuously that means your camera has synced. And the LED on the camera blinks amber, then your sync isn’t successful).
● Verify the camera LED on the base station and repeat these steps for all the Arlo security cameras.

The executive’s team said you got any issue while the Arlo security camera setup. Then do not get hesitate and make a connection with our team. We are available 24 hours to provide the best information to our users to enhances security experience.

Source URL: https://www.feedsfloor.com/technology/ultimate-process-arlo-security-camera-setup