Air die grinder, also called pneumatic sandpaper machine, is an internationally recognized brand on the top of the grinding list. Its professionalism in grinding and high-quality products are beyond doubt. The market share of high-end furniture and high-end car repair shops at home and abroad is very high. The unit price of a pneumatic sander is very high, usually 3,000-4,000 yuan. Regarding the usual furniture companies and car repair factories, it is really daunting.
I want to find another pneumatic sander with a lower unit price to replace it. Because the air inlet interface is different, there has never been a replacement. Many times when the dry mill is worn out, it can only be scrapped together with the dust-free dry milling system. A set of equipment worth tens of thousands of yuan is really regrettable. According to the needs of customers and shopping malls, we have specially planned a variety of pneumatic sanders including round and square, medium and fine grinding. The disc size is 5 inches and 6 inches, and it can be directly connected to the dust-free dry grinding system It is very convenient to use, and the unit price is relatively economical. It is 100% produced and the quality is guaranteed.
Maintenance of pneumatic sander:
1. It must be lubricated and stored before the pneumatic sander is not used for a long time, otherwise the embroidery will be damaged. Used to lubricate and save before get off work.
2. Before using the manual oiler for lubrication, disconnect the pneumatic sander from the air pressure tube, and then add the lubricating oil (#30-#60) into it. After connecting the pneumatic sander and air pressure tube, press down the screwdriver to idle for about two seconds It can be lubricated and preserved. 1-2 times a day can extend the life of the tool.
3. When replacing the soft sheath, put the sheath into the adjusting ring first, and then use air pressure to blow to make the outer diameter of the sheath larger, and at the same time squeeze the sheath upward.
https://www.mhttools.com/