As people's living conditions continue to improve, cars are no longer as high-end goods that people can't afford, and now there are more and more car owners. However, everyone knows that the price of a car is very expensive. Many car owners are more cherished after buying a car. People who use the car often clean and maintain the car.



Most people wash their own cars with water guns, and wash them all over the car. You can't notice that you haven't waited for the car's motor to cool down and then go to the car wash. Everyone can think about the consequences. Nowadays, the motor has two kinds of all-aluminum and cast iron. The general car uses cast iron. The working temperature of the motor is very high. The red iron is poured with cold water, and you can think about it.



So how to properly clean the motor, Eaton Char-lynn Motor tells you how to:



1. First open the fuel tank cap. Then take out the filter cartridge inside and use a hose to pump out the fuel in the tank. Leave about 10-15 cm deep, then add 80 ml of ethanol gasoline to replace the cleaning agent, reinstall the filter cartridge, and then cover the fuel tank



2. Disassemble the motor inlet and return pipes, and then connect the oil inlet pipe and the return pipe of the motor with the inlet pipe and the return pipe of the rabbit disassembly cleaning machine, and use a special interface to connect the oil inlet battalion and the oil returning battalion to form a loop.



3. The owner can understand the scale on the tank according to the free-cleaning machine or 加入 according to the number of motor cylinders (-about 100m per barrel of gasoline), add fuel to the storage tank with the cleaning-free cleaning agent, and inside Add 100ml of ethanol gasoline to replace the cleaning agent.



4. According to different car models, the pressure will be adjusted appropriately. Under normal circumstances, the EFI car needs to adjust 2 to 3 pressures. The carburetor model can be adjusted to a more appropriate pressure.



5. Start the car motor, check the oil inlet pipe and the return pipe of the car for oil leakage. In the case of idling, it should be cleaned for about 20 minutes. When it is less than 4 minutes, it will increase - the throttle. The carbon deposits and moisture in the motor can be sufficiently discharged from the exhaust pipe during the cleaning process.



6. Disassemble the oil inlet pipe and the oil return pipe of the free-cleaning washing machine and the automobile motor, so that the entire oil circuit system returns to normal, start the automobile motor, and the owner carefully checks whether there is oil leakage.

https://www.xjetl.com